Prodotti

Turbinex

With Turbinex, dust is captured and conveyed towards the machine’s suction system.
This not only helps maintain a healthier working environment, but also reduces the risk of breakage of the tool and the electrospindle.

Technical characteristics

• Clamping system: Mechanical with EOC 16 precision collets
• Turbine: 10 fans
• Machine interface: HSK63F – ISO30
• Tool interface: Cylindrical shank
• Tool shank: 6-16 mm
• Max. tool diameter: 16 mm
• Turbinex diameter: 93 mm
• Rpm: max 24.000
• Balancing: G6.3

Hogger with chamfered tooth

PCD Universal hoggers ideal for processing different materials. Particularly suitable for medium or low compact material.

Design

• Diamond tipped (PCD)
• Chamfered tooth
• Coupling system: Mechanical, Hydro, Hexagonal base Hydro
• Feed speed: up to 40 m/min
• Max rpm: 6.000

Boring bits for through holes L. 70 

Solid tungsten carbide (HWM) boring bits with helical body and double angle cutting edges in HW to make through holes on solid wood panels, wood composites and laminates with a maximum thickness of 20-30 mm.

Design

• Helical body in HWM
• 2 double angle cutting edges
• 2 spiral flutes
• Max workpiece thickness: 20-30 mm

Boring bits for blind holes

Boring bits for blind holes with solid tungsten carbide (HWM) body and cutting edges . Wirutex recommends these to anyone who does not need to bore a large number of holes and does not require an excellent finish. Suitable for machining solid wood, wood composites and laminates.

Design

• Helical body in HWM
• Centring point – 2 cutting edges in HWM
• 2+2 spiral flutes
• 2 ground spurs with reinforced sharpening

W-DrillCut 

Boring bits for blind holes in HWM, suitable for machining where the hole is near the bottom of the panel, minimising the risk of breakage. Suitable for chipboard, melamine, MDF and veneered and lacquered materials. Greater durability and better finish.

Design

• Helical body in HWM
• Centring point – 2 cutting edges in HWM
• 2 spiral flutes
• 2 ground spurs

Whole tip Z=1

PCD whole tip router bits and HWM body. For finger joints and rebating on chipboard, MDF with laminate facing, Corian, HPL and stratified materials.

Design 

• PCD tip
• HWM body
• Sharpening area: 3.0 mm
• Feed speed: as much as 5 to 10 m/min
• Max. rpm: 18,000 – 24,000

Whole tip Z=2

Router bits with 2 PCD whole tips and solid carbide body. For finger joints and rebating. Ideal for machining operations on chipboard, MDF and its derivates.

Design

• PCD tips
• HWM body
• Sharpening area: up to 3.0 mm
• Feed speed: from 3 to 20 m/min
• Max. rpm: 24,000 – 36,000

Advanced

PCD router cutters with whole tips Z=2, body in HWM, specifically for machining highly abrasive materials, phenolic materials, Corian and stratified materials. To ensure maximum stability and cutting quality, Wirutex recommends using with a ThermoGrip chuck.

Design

• PCD tips
• HWM body
• Sharpening area: up to 3.0 mm
• Feed speed: from 3 to 10 m/min
• Max. rpm: 24,000 – 36,000

HW – DP Universal saw blades

UNIVERSAL SAW BLADES

HW_DP Panel sizing saw blades

PANEL SIZING SAW BLADES

HW – DP Scoring saw blades

SCORING SAW BLADES

Boring bit for through holes solid tungsten carbide body

NEW-Mini Z=1+1

PCD router cutters with good cutting quality. For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.

Design

• PCD tips
• HM tungsten carbide plunging tip
• Positive and negative shear angle
• Sharpening area: 1.0 mm
• Feed speed: up to 15 m/min
• Max. rpm: 18,000 – 24,000

Nesting ECO

PCD router cutters for CABINET Nesting, ideal for working melamine and MDF panels. It can be used with any type of chuck. Recommended for use on Turbinex.

Design

• PCD tips
• PCD plunging tip
• Tungsten carbide body
• Sharpening area: 2.0 mm
• Feed speed: up to 20 m/min
• Max. rpm: 24,000

Nesting HP

PCD router cutters for Nesting. This can be used not only to machine MDF and melamine panels, but also for plywood and coated plywood. Recommended for use on Turbinex.

Design

• PCD tips
• PCD plunging tip
• Tungsten carbide body
• Sharpening area: 1.0 mm
• Feed speed: up to 20 m/min
• Max. rpm: 24,000

Revolution

PCD router cutter Z2+2 for nesting machining. Due to its versatility, it can be used to process different types of material. Compared with conventional Z=3 Nesting cutters, it has a higher discharge capacity.
Design

• PCD tips
• PCD plunging tip
• Tungsten carbide body
• Sharpens 3/4 times
• Max. rpm: 24,000

Revolution PRO

PCD router cutter, Z2+2. For nesting operations on MDF, melamine, plywood and coated plywood. Greater axiality and better finish compared to Revolution. Ideal for preventing PVC edge breakage on exit. Watch the video
Design

• PCD tips
• Heavy metal body
• Sharpens 3/4 times
• Feed speed: up to 15 m/min
• Max. rpm: 24,000

Helix

PCD router cutter, Z2+1. For nesting operations on MDF, melamine, plywood and coated plywood. It allows excellent material removal and excellent chip discharge.

Design

• PCD tips
• Heavy metal body
• Sharpens 3/4 times
• Feed speed: up to 12 m/min
• Max. rpm: 24,000

Planing cutter

Polycrystalline diamond cutter to level the MDF support panels. For planing operations on CNC machining centres. Available in both the Z4 and Z6 versions. For MDF support panels.

Design

• MED-type tips in PCD
• Positive and negative shear angle
• Sharpening area: 2.0 mm
• Feed speed: up to 20 m/min
• Max. rpm: 16,500

Planing cutter with interchangeable knives

Cutters with interchangeable HW tungsten carbide knives specifically for levelling the MDF support panel. Available in both the Z3 and Z4 versions.

Design

• Interchangeable knives in HW
• Knife size 12x12x1.5
• Feed speed: up to 15 m/min
• Max. rpm: 12,000/18,000

Heat Shrink Chuck

HSK63F shank

Router cutters for “T” grooves

Profiled router cutters in PCD, perfect for executing profiled grooves on unpolished chipboard, chipboard and faced MDF, polished cladding and laminated materials.  Various profiles are available.

Design

• PCD tips
• Positive and negative shear angle
• Feed speed: up to 10 m/min
• rpm: 18,000

Straight router cutters Z=2+1

Straight solid carbide cutters for CNC. With a central boring cutting edge, they can work solid wood and wood composites, laminated materials and plastic material.

Design

• HWM body
• Cutting edge head in tungsten carbide (HW)
• 2 tungsten carbide cutting edges (HW)

Helical router bits for locks

Polycrystalline diamond helical cutters for locks to be used on CNC machining centres. Ideal for machining solid wood and wood composite panels.

Design

• PCD tips
• HWM body
• Feed speed: up to 3 m/min
• Max. rpm: 14,000

ER32 precision collet

• Interchangeable biconical collets with interspersed and contrasting axial grooves.
• Can be adapted to most conical chucks
• For chucks with HSK63F, ISO30 and assembled flange ISO30 shank.

Heat Shrink Chuck

ISO30 shank

ER40 precision collet

• Interchangeable biconical collets with interspersed and contrasting axial grooves.
• Can be adapted to most conical chucks
• For chucks with HSK63F, ISO30 and assembled flange ISO30 shank.

Hydro Chuck

HSK63F shank

Universal disassembly device for chucks

• For assembling and disassembling tools on the chuck body.
• This can be mounted on any workbench thanks to the hole in the base.
• Available for HSK 63F and ISO30 chucks

Chuck for Precision Collet

HSK63F shank

Ring nut for ER32 chuck for precision collet

• Clamping ring nuts for collet chucks
• Also available with ball bearings
• Facilitates extraction of collets from the chucks

Chuck for Precision Collet

HSK63F shank – STAINLESS STEEL

Ring nut for ER40 chuck for precision collet

• Clamping ring nuts for collet chucks
• Also available with ball bearings
• Facilitates extraction of collets from the chucks

Chuck for Precision Collet

ISO30 conical shank

Key wrench for ring nut

• Spanner for removing ring nuts
• Available for ER32 ring nut
• Available for ER40 ring nut

Boring bits for hinges L. 57.5

Carbide hinge boring bits, total length 57.5 mm. Available in diameters from 14 mm to 60 mm

Design

• Centring point in HW
• Centring point h= 1 mm
• 2 cutting edges in HW
• 2 negative sharpening ground spurs

Chuck for Precision Collet

ISO30 conical shank – STAINLESS STEEL

Hook wrench for ring nut 

• Hook wrench for disassembly
• Available for ER40 ring nut

PCD boring bits for hinges

Polycrystalline diamond hinge boring bits for use on machines specifically for creating hinge pockets on chipboard and coated MDF panels. 

Design

• Adjustable centring point in tungsten carbide (HW)
• Tips in polycrystalline diamond (PCD)
• Parallel shank with driving flat and adjusting screw
• Centring point h= 0.5 mm
• Feed speed: up to 3 m/min
• Max. rpm: 12,000

Boring bits for hinges L. 70

Carbide hinge boring bits, total length 70 mm. Suitable for machining laminates, solid wood and wood composites.

Design

• Centring point in HW
• Centring point h= 1 mm
• 2 cutting edges in HW
• 2 negative sharpening ground spurs

Boring bits with double clearance angle for through holes L. 57.5 

Solid carbide (HWM) boring bits for through holes with double clearance angle and double angle body to make through holes on solid wood panels, wood composites and laminates with a maximum thickness of 20 mm

Design

• Head in HW
• 2 double angle cutting edges in HW
• 2 spiral flutes
• Total length: 57.5 mm

Boring bits with double clearance angle for through holes L. 70

 Boring bits with double clearance angle and double angle body and cutting edges in HW to make through holes on solid wood panels, wood composites and laminates with a maximum thickness of 25-30 mm

Design

• Head in HW
• 2 double angle cutting edges in HW
• 2 spiral flutes
• Total length: 70 mm

Boring bits for through holes 2 spiral flutes L.57.5

Carbide boring bits for through holes with 2 helical flutes, to make through holes in solid wood panels, wood composites and laminates with a maximum thickness of 20 mm

Design

• Head in HWM
• 2 cutting edges in HW
• 2 spiral flutes
• Total length: 57.5 mm

Bit for through holes 2 spiral flutes L. 70 

Boring bits with 2 helical flutes, body and cutting edges in tungsten carbide (HM) to make through holes in solid wood panels, wood composites and laminates with a maximum thickness of 25-30 mm 

Design

• Head in HWM
• 2 cutting edges in HW
• 2 spiral flutes
• Total length: 70 mm

Boring bits for through holes 2 spiral flutes L. 77

Carbide boring bits for through holes with 2 helical flutes, to make through holes in solid wood panels, wood composites and laminates with a maximum thickness of 30-40 mm

Design

• Head in HWM
• 2 cutting edges in HW
• 2 spiral flutes
• Total length: 77 mm

Bits for through holes 4 spiral flutes L. 57.5 

Boring bits with 4 helical flutes, body and cutting edges in tungsten carbide (HM) to make through holes in solid wood panels, wood composites and laminates with a maximum thickness of 20-25 mm

Design

• Head in HWM
• 2 cutting edges in HW
• 4 spiral flutes
• Total length: 57.5 mm

Bit for through holes 4 spiral flutes L. 70

Boring bits with 4 helical flutes, body and cutting edges in tungsten carbide (HM) to make through holes in solid wood panels, wood composites and laminates with a maximum thickness of 30-35 mm

Design

• Head in HWM
• 2 cutting edges in HW
• 2 spiral flutes
• Total length: 70 mm

Helical boring bits for small through holes Z=2

Helical boring bits in HWM perfect for making small through holes in solid wood panels, wood composites and laminates. Size of shank same as cutting diameter.

Design

• 2 cutting edges in HWM
• 2 spiral flutes
• Shank same as cutting diameter

Boring bits with countersink for blind holes

For countersinking and boring blind holes in solid wood, wood composites and laminated and plastic materials, these HM boring bits with countersink are available with a total length of 57.5 or 70 mm

Design

• Head in HWM – 2 cutting edges in HW
• Centring point
• 2 negative sharpening ground spurs
• 2 spiral flutes

Boring bits with countersink for through holes

For countersinking and boring through holes in panels in solid wood, wood composites and laminated and plastic materials, these HM quick change bits with countersink are available with a total length of 70 mm

Design

• Centring point in HW
• 2 cutting edges in HW
• 2 negative sharpening ground spurs
• 2 spiral flutes

Boring bits with threaded shank for blind holes

Carbide router bits to be inserted on the boring machine chucks. Ideal for making blind holes on laminate, solid wood and wood composite panels.

Design

• Head in solid tungsten carbide (HWM)
• 2 cutting edges in HW
• 2 scorers
• 4 spiral flutes

Countersinks for helical bits for boring bit shank

Made of high-strength steel, they can be firmly attached to the boring bit shank thanks to the conical screw. Used for laminating and bevelling holes on laminates, solid wood and wood composites.

Spare parts

• STEI screw (grub) M5X
• Hex wrench 2.5 mm

Countersinks for helical bits for boring bit spiral head

They are centred and fixed on the spiral head of the boring bit by two opposing screws with cup-shaped ends. Used for laminating and bevelling holes on laminates, solid wood and wood composites.

Spare parts

• STEI screw (grub) M5X
• Hex wrench 2.5 mm

Chucks for small bores

Chucks for helical boring bits with a driving flat. To be used with helical boring bits with a shank with the same diameter as the chuck hole. For boring machines.

Spare parts

• STEI screw (grub) M5X
• Hex wrench 2.5 mm

Chucks

Can also be used on Masterwood, Morbidelli, Torwegge, Vitap and Weeke machines. For helical boring bits with a shank with the same diameter as the chuck hole.

Spare parts

• STEI screw (grub) M5X
• Hex wrench 2.5 mm

Bushings

Bushings with a driving flat for insertion on chucks or adaptors for boring machines. To be used with helical bits with a shank with the same diameter as the bushing hole.

Chuck for Precision Collet

with aluminium flange ISO30 conical shank

Boring bits for blind holes with curved ground spurs

Suitable for machining solid wood, wood composites and laminates, these boring bits for blind holes in HW have 2 curved ground spurs and tungsten carbide (HW) cutting edges. Total length: 57.5 mm or 70 mm

Design

• Head in HW
• 2 cutting edges in HW
• 2 spiral flutes
• 2 ground spurs

Boring bits for blind holes 2 spiral flutes L. 57.5

Boring bits in HM for blind holes, ideal for machining solid wood, wood composites and laminates. With centring point and parallel shank with driving flat and adjusting screw.
Total length 57.5 mm

Design

• Head in HWM
• 2 cutting edges in HW
• 2 negative sharpening ground spurs
• 2 spiral flutes

Boring bits for blind holes 2 spiral flutes L.70

Ideal for making blind holes on laminates, solid wood and wood composites, these boring bits in HW for blind holes with a total length of 70 mm have a solid tungsten carbide head and tungsten carbide cutting edges. Parallel shank with driving flat and adjusting screw.

Design

• Head in HWM
• 2 cutting edges in HW
• 2 negative sharpening ground spurs
• 2 spiral flutes

Boring bits for blind holes 2 spiral flutes L. 77

Boring bits in HM for blind holes. Suitable for machining solid wood, wood composites and laminates. With centring point and parallel shank with driving flat and adjusting screw.
Total length 77 mm

Design

• Head in HWM
• 2 cutting edges in HW
• 2 negative sharpening ground spurs
• 2 spiral flutes

Boring bits for blind holes 4 spiral flutes L. 57.5

Boring bits for blind holes in HW, 57.5 mm long, with 4 spiral flutes and 2 negative sharpening ground spurs. Perfect for machining solid wood, wood composites and laminates. With centring point and parallel shank with driving flat and adjusting screw.

Design

• Head in HWM
• 2 tungsten carbide cutting edges
• 2 negative sharpening ground spurs
• 4 spiral flutes

Boring bits for blind holes 4 spiral flutes L.70

Boring bits for blind holes in HW with 4 spiral flutes and 2 negative sharpening ground spurs. Ideal for blind holes in laminates, solid wood and wood composites. Total length 70 mm

Design

• Head in HWM
• 2 cutting edges in HW
• 2 negative sharpening ground spurs
• 4 spiral flutes

Boring bits for blind holes 4 spiral flutes L. 85

Boring bits for blind holes in HW with 4 spiral flutes and 2 negative sharpening ground spurs. Ideal for laminates, solid wood and wood composites. With centring point and parallel shank with driving flat and adjusting screw. Total length 85 mm

Design

• Head in HWM
• 2 cutting edges in HW
• 2 negative sharpening ground spurs
• 4 spiral flutes

Boring bits for blind holes 4 spiral flutes L. 105

Boring bits for blind holes in HW with 4 spiral flutes and 2 negative sharpening ground spurs. Ideal for laminates, solid wood and wood composites. 
Total length 105 mm

Design

• Head in HWM
• 2 cutting edges in HW
• 2 negative sharpening ground spurs
• 4 spiral flutes

Helical boring bits for small blind holes Z=2

Helical boring bits in HWM perfect for making small blind holes in solid wood panels, wood composites and laminates. Size of shank same as cutting diameter.

Design

• 2 cutting edges in HWM
• 2 spiral flutes
• Shank same as cutting diameter

Positive helical router bits Z=1

Upcut spiral bits, with positive cutting edges and solid tungsten carbide body. For contouring, sizing and profiling on CNC machining centres and point-to-point boring machines. Suitable for machining operations on hardwood and wood composites, laminated and plastic materials.

Design

• Solid tungsten carbide (HWM) body
• 1 positive helical cutting edge in tungsten carbide (HM)
• Chips discharged upwards
• Improved finish on lower side of workpiece

Positive helical router bits Z=2 for finishing

Upcut spiral bits, with positive cutting edges and solid tungsten carbide for CNC machining centres and point-to-point boring machines. Ideal for finishing operations, but also for contouring, sizing and profiling solid wood and wood composites, laminated and plastic materials.

Design

• HWM body
• 2 positive helical cutting edges in HW
• Chips discharged upwards
• Improved finish on lower side of workpiece

Negative helical router bits Z=2 for finishing

Downcut spiral bits, with negative cutting edge and body in solid tungsten carbide for CNC machining centres and point-to-point boring machines. Ideal for finishing operations, but also for contouring, sizing and profiling solid wood and wood composites, laminated and plastic materials.

Design

• HWM body
• 2 negative helical cutting edges in tungsten carbide (HM)
• Chips discharged downwards
• Improved finish on upper side of workpiece

Positive helical router bits Z=3 for finishing

Helical cutters with positive cutting edges and solid tungsten carbide for CNC machining centres and point-to-point boring machines. Ideal for contouring, sizing and profiling solid wood and wood composites.  Optimal finish of the machined surface.

Design

• HWM body
• 3 positive helical cutting edges in tungsten carbide (HM)
• Chips discharged upwards
• Improved finish on lower side of workpiece

Negative helical router bits Z=3 for finishing

Helical cutters with negative cutting edge and body in solid tungsten carbide for CNC machining centres and point-to-point boring machines. Ideal for contouring, sizing and profiling solid wood and wood composites.  Optimal finish of the machined surface.

Design

• HWM body
• 3 negative helical cutting edges in HM tungsten carbide
• Chips discharged downwards
• Improved finish on upper side of workpiece

Challenge

Solid carbide helical bits with 3 positive cutting edges and chipbreaker. This is one of the best tools of its kind in the catalogue, thanks to its dual application: chipbreaker cutter and for finishing. For working solid wood and wood composites, Challenge ensures optimal finishing on the entire surface.

Design

• HWM body
• 3 positive helical cutting edges with chipbreaker
• Chips discharged upwards
• Housing for Seeger starting at D.12

Positive helical router bits Z=3 with chipbreaker

Helical cutters with positive cutting edge chipbreaker for CNC machining centres and point-to-point boring machines. For contouring, sizing and profiling solid wood and wood composite panels. Ideal for roughing.

Design

• HWM body
• 3 positive helical cutting edges in HM with chipbreaker
• Chips discharged upwards
• Improved finish on lower side of workpiece

Negative helical router bits Z=3 with chipbreaker

Helical cutters with negative cutting edge chipbreaker for CNC machining centres and point-to-point boring machines. For contouring, sizing and profiling solid wood and wood composite panels. Ideal for roughing.

Design

• HWM body
• 3 negative helical cutting edges in HM with chipbreaker
• Chips discharged downwards
• Improved finish on upper side of workpiece

Positive and negative router bits edges

Up-Downcut spiral bits, with positive and negative cutting edges to achieve an optimal finish on both sides of the panel. These are used on CNC machining centres and point-to-point boring machines. For contouring, sizing and profiling  hardwood and wood composites, laminated and plastic materials.

Design

• HWM body
• 1 positive and 1 negative helical cutting edge in HM (Z=1+1)
• 2 positive and 2 negative helical cutting edges in HM (Z=2+2)
• Excellent finish on both sides of the workpiece

Boring bits in PCD for blind holes

The PCD boring bits for blind holes are available with an 8 or 10 mm diameter and different cutting lengths. They all have a centring tip to allow precise positioning on the desired point. Ideal for machining MDF and melamine.

Design

• Polycrystalline diamond (PCD) centring point
• Polycrystalline diamond (PCD) tips
• Parallel shank with driving flat and adjusting screw
• Feed speed: up to 3 m/min
• Max. rpm: 12,000

Boring bits for blind holes_solid HM body

Used on boring machines and CNC machining centres, boring bits for blind holes with a solid tungsten carbide (HWM) body, available in 5, 8 and 10 mm diameters, are ideal for machining MDF and melamine. The HWM body guarantees greater resistance.

Design

• Solid tungsten carbide (HWM) body
• Polycrystalline diamond (PCD) tips
• Parallel shank with driving flat and adjusting screw
• Feed speed: up to 3 m/min
• Max. rpm: 12,000

Boring bits for blind holes with countersink

Boring bits in PCD suitable for making countersunk blind holes. To be used on boring and CNC machines, they are available in a 8 or 10 mm diameter and 57.5 or 70 mm total length.

Design

• Polycrystalline diamond (PCD) tips
• Parallel shank with driving flat and adjusting screw
• Feed speed: up to 3 m/min
• Max. rpm: 12,000

NEW-Mini Z=1+1_ body in solid tungsten carbide

PCD router cutters with HWM body which provides greater resistance to vibrations and makes them less prone to breakage than the New-Mini Z1+1.

Design

• PCD tips
• Cutting edge head in HWM
• Positive and negative shear angle
• Sharpening area: 1.0 mm
• Feed speed: up to 20 m/min
• Max. rpm: 18,000 – 24,000

NEW-Mini Z=2+2

PCD Router cutters with double cover. This design ensures longer cutting for the tool as compared to the New-Mini Z1+1. For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.

Design

• PCD tips
• Cutting edge head in tungsten carbide (HM)
• Positive and negative shear angle
• Sharpening area: 1.0 mm
• Feed speed: up to 20 m/min
• Max. rpm: 18,000 – 24,000

NEW-Mini Z=2+2_ body in solid tungsten carbide

PCD router cutters with double cover and HWM body. Longer cutting life, more resistant to vibrations and less prone to breakage. For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.

Design

• PCD tips
• Cutting edge head in HWM
• Positive and negative shear angle
• Sharpening area: 1.0 mm
• Feed speed: up to 20 m/min
• Max. rpm: 24,000

TiGi-D.20 

PCD router cutters with a diameter of 20 and a 30° cutting angle. They ensure good cutting quality and versatility. Suitable for contouring, boring and sizing materials such as unpolished chipboard, chipboard and faced MDF.

Design

• PCD tips
• PCD Plunging tip
• Positive and negative shear angle
• Sharpening area: 1.0 mm
• Feed speed: up to 20 m/min
• Max. rpm: 18,000 – 24,000

TiCi-D.20 

PCD  router bits with a diameter of 20 and a 35° cutting angle. Optimum cutting quality. Suitable for contouring, boring, sizing and for finger joints and rebating. Machining operations on unpolished chipboard, chipboard and faced MDF.

Design

• PCD tips
• PCD  Plunging tip
• Positive and negative shear angle
• Sharpening area: 2.0 mm
• Feed speed: up to 25 m/min
• Max. rpm: 24,000

TiCi-D.22

 PCD  router cutters with a diameter of 22 and a 35° cutting angle. Optimum cutting quality. Suitable for contouring, boring, sizing and for finger joints and rebating. Machining operations on unpolished chipboard, chipboard and faced MDF.

Design

• PCD tips
• PCD plunging tip
• Positive and negative shear angle
• Sharpening area: 2.0 mm
• Feed speed: up to 25 m/min
• Max. rpm: 18,000 – 24,000

TiCi-D.25 

PCD router cutters with a diameter of 25 and a 35° cutting angle. They ensure outstanding finishing quality. They are ideal for contouring and sizing. Machining operations on unpolished chipboard, chipboard and faced MDF panels.

Design

• PCD tips
• HM tungsten carbide plunging tip
• Positive and negative shear angle
• Sharpening area: 2.0 mm
• Feed speed: up to 25 m/min
• Max. rpm: 24,000

NEW-Helical Multi-cutting

Router bits for CNC with PCD helical multi-cutters. Extremely versatile, they have outstanding cutting quality and are ideal for sizing and contouring melamine, unpolished chipboard, MDF and faced chipboard panels.

Design

• PCD tips
• PCD plunging tip
• Positive and negative shear angle
• Sharpening area: 3.0 mm
• Feed speed: up to 25 m/min
• Max. rpm: 24,000

QuGi-D.25

PCD router cutters with a diameter of 25 and a 45° cutting angle. Maximum precision and cutting quality on unpolished chipboard, chipboard and faced MDF, as well as gloss and laminate coatings, plywood and solid wood.

Design

• PCD tips
• PCD plunging tip
• Positive and negative shear angle
• Sharpening area: 3.0 mm
• Feed speed: up to 30 m/min
• Max. rpm: 24,000

Batch-One 

One of the most versatile and highest performance PCD cutters in the catalogue. For CNC machining centres, Cutting Centres and NextStep. Superior finishing quality;  for contouring, boring, sizing, for finger joints and rebating. Machining operations on MDF, MDF coated MDF, chipboard, melamine and plywood panels. For the best performance, we recommend using it with a Hydro-Grip or Thermogrip chuck.

Design

• PCD tips
• PCD Plunging tip
• Heavy metal body
• Positive and negative shear angle
• Sharpening area: 2.0 mm
• Feed speed: up to 25 m/min
• Max. rpm: 24,000

Positive helical cutter for locks Z=3

Helical cutters with positive cutting edge chipbreaker, for CNC machining centres and point-to-point boring machines. For contouring, sizing and custom profiling on solid wood and wood composites. With housing for “Seeger”.

Design

• HWM body
• 3 positive helical cutting edges with chipbreaker
• Chips discharged upwards
• Improved finish on lower side of the panel