Boring bits for through holes L. 70
Solid tungsten carbide (HWM) boring bits with helical body and double angle cutting edges in HW to make through holes on solid wood panels, wood composites and laminates with a maximum thickness of 20-30 mm.
Design
- Helical body in HWM
- 2 double angle cutting edges
- 2 spiral flutes
- Max workpiece thickness: 20-30 mm
Boring bits for blind holes
Boring bits for blind holes with solid tungsten carbide (HWM) body and cutting edges . Wirutex recommends these to anyone who does not need to bore a large number of holes and does not require an excellent finish. Suitable for machining solid wood, wood composites and laminates.
Design
- Helical body in HWM
- Centring point – 2 cutting edges in HWM
- 2+2 spiral flutes
- 2 ground spurs with reinforced sharpening
W-DrillCut
Boring bits for blind holes in HWM, suitable for machining where the hole is near the bottom of the panel, minimising the risk of breakage. Suitable for chipboard, melamine, MDF and veneered and lacquered materials. Greater durability and better finish.
Design
- Helical body in HWM
- Centring point – 2 cutting edges in HWM
- 2 spiral flutes
- 2 ground spurs
Boring bits for hinges L. 57.5
Carbide hinge boring bits, total length 57.5 mm. Available in diameters from 14 mm to 60 mm
Design
- Centring point in HW
- Centring point h= 1 mm
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
Boring bits for hinges L. 70
Carbide hinge boring bits, total length 70 mm. Suitable for machining laminates, solid wood and wood composites.
Design
- Centring point in HW
- Centring point h= 1 mm
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
Boring bits with double clearance angle for through holes L. 57.5
Solid carbide (HWM) boring bits for through holes with double clearance angle and double angle body to make through holes on solid wood panels, wood composites and laminates with a maximum thickness of 20 mm
Design
- Head in HW
- 2 double angle cutting edges in HW
- 2 spiral flutes
- Total length: 57.5 mm
Boring bits with double clearance angle for through holes L. 70
Boring bits with double clearance angle and double angle body and cutting edges in HW to make through holes on solid wood panels, wood composites and laminates with a maximum thickness of 25-30 mm
Design
- Head in HW
- 2 double angle cutting edges in HW
- 2 spiral flutes
- Total length: 70 mm
Boring bits for through holes 2 spiral flutes L.57.5
Carbide boring bits for through holes with 2 helical flutes, to make through holes in solid wood panels, wood composites and laminates with a maximum thickness of 20 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 spiral flutes
- Total length: 57.5 mm
Bit for through holes 2 spiral flutes L. 70
Boring bits with 2 helical flutes, body and cutting edges in tungsten carbide (HM) to make through holes in solid wood panels, wood composites and laminates with a maximum thickness of 25-30 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 spiral flutes
- Total length: 70 mm
Boring bits for through holes 2 spiral flutes L. 77
Carbide boring bits for through holes with 2 helical flutes, to make through holes in solid wood panels, wood composites and laminates with a maximum thickness of 30-40 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 spiral flutes
- Total length: 77 mm
Bits for through holes 4 spiral flutes L. 57.5
Boring bits with 4 helical flutes, body and cutting edges in tungsten carbide (HM) to make through holes in solid wood panels, wood composites and laminates with a maximum thickness of 20-25 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 4 spiral flutes
- Total length: 57.5 mm
Bit for through holes 4 spiral flutes L. 70
Boring bits with 4 helical flutes, body and cutting edges in tungsten carbide (HM) to make through holes in solid wood panels, wood composites and laminates with a maximum thickness of 30-35 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 spiral flutes
- Total length: 70 mm
Helical boring bits for small through holes Z=2
Helical boring bits in HWM perfect for making small through holes in solid wood panels, wood composites and laminates. Size of shank same as cutting diameter.
Design
- 2 cutting edges in HWM
- 2 spiral flutes
- Shank same as cutting diameter
Boring bits with countersink for blind holes
For countersinking and boring blind holes in solid wood, wood composites and laminated and plastic materials, these HM boring bits with countersink are available with a total length of 57.5 or 70 mm
Design
- Head in HWM – 2 cutting edges in HW
- Centring point
- 2 negative sharpening ground spurs
- 2 spiral flutes
Boring bits with countersink for through holes
For countersinking and boring through holes in panels in solid wood, wood composites and laminated and plastic materials, these HM quick change bits with countersink are available with a total length of 70 mm
Design
- Centring point in HW
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
- 2 spiral flutes
Boring bits with threaded shank for blind holes
Carbide router bits to be inserted on the boring machine chucks. Ideal for making blind holes on laminate, solid wood and wood composite panels.
Design
- Head in solid tungsten carbide (HWM)
- 2 cutting edges in HW
- 2 scorers
- 4 spiral flutes
Boring bits for blind holes with curved ground spurs
Suitable for machining solid wood, wood composites and laminates, these boring bits for blind holes in HW have 2 curved ground spurs and tungsten carbide (HW) cutting edges. Total length: 57.5 mm or 70 mm
Design
- Head in HW
- 2 cutting edges in HW
- 2 spiral flutes
- 2 ground spurs
Boring bits for blind holes 2 spiral flutes L. 57.5
Boring bits in HM for blind holes, ideal for machining solid wood, wood composites and laminates. With centring point and parallel shank with driving flat and adjusting screw.
Total length 57.5 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
- 2 spiral flutes
Boring bits for blind holes 2 spiral flutes L.70
Ideal for making blind holes on laminates, solid wood and wood composites, these boring bits in HW for blind holes with a total length of 70 mm have a solid tungsten carbide head and tungsten carbide cutting edges. Parallel shank with driving flat and adjusting screw.
Design
- Head in HWM
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
- 2 spiral flutes
Boring bits for blind holes 2 spiral flutes L. 77
Boring bits in HM for blind holes. Suitable for machining solid wood, wood composites and laminates. With centring point and parallel shank with driving flat and adjusting screw.
Total length 77 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
- 2 spiral flutes
Boring bits for blind holes 4 spiral flutes L. 57.5
Boring bits for blind holes in HW, 57.5 mm long, with 4 spiral flutes and 2 negative sharpening ground spurs. Perfect for machining solid wood, wood composites and laminates. With centring point and parallel shank with driving flat and adjusting screw.
Design
- Head in HWM
- 2 tungsten carbide cutting edges
- 2 negative sharpening ground spurs
- 4 spiral flutes
Boring bits for blind holes 4 spiral flutes L.70
Boring bits for blind holes in HW with 4 spiral flutes and 2 negative sharpening ground spurs. Ideal for blind holes in laminates, solid wood and wood composites. Total length 70 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
- 4 spiral flutes
Boring bits for blind holes 4 spiral flutes L. 85
Boring bits for blind holes in HW with 4 spiral flutes and 2 negative sharpening ground spurs. Ideal for laminates, solid wood and wood composites. With centring point and parallel shank with driving flat and adjusting screw. Total length 85 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
- 4 spiral flutes
Boring bits for blind holes 4 spiral flutes L. 105
Boring bits for blind holes in HW with 4 spiral flutes and 2 negative sharpening ground spurs. Ideal for laminates, solid wood and wood composites.
Total length 105 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
- 4 spiral flutes
Helical boring bits for small blind holes Z=2
Helical boring bits in HWM perfect for making small blind holes in solid wood panels, wood composites and laminates. Size of shank same as cutting diameter.
Design
- 2 cutting edges in HWM
- 2 spiral flutes
- Shank same as cutting diameter