PCD Router Bits for Nesting
Nesting is an automatic panel cutting technique on CNC machining centres used to optimise sectioning of the panel and reduce machining times to a minimum. Wirutex has dedicated a vast section of its catalogue to polycrystalline diamond cutters for Nesting machining. Tools designed and optimised to increase productivity and efficiency.
Nesting ECO
PCD router cutters for CABINET Nesting, ideal for working melamine and MDF panels. It can be used with any type of chuck. Recommended for use on Turbinex.
Design
- PCD tips
- PCD plunging tip
- Tungsten carbide body
- Sharpening area: 2.0 mm
- Feed speed: up to 20 m/min
- Max. rpm: 24,000
Nesting HP
PCD router cutters for Nesting. This can be used not only to machine MDF and melamine panels, but also for plywood and coated plywood. Recommended for use on Turbinex.
Design
- PCD tips
- PCD plunging tip
- Tungsten carbide body
- Sharpening area: 1.0 mm
- Feed speed: up to 20 m/min
- Max. rpm: 24,000
Revolution
PCD router cutter Z2+2 for nesting machining. Due to its versatility, it can be used to process different types of material. Compared with conventional Z=3 Nesting cutters, it has a higher discharge capacity.
Design
- PCD tips
- PCD plunging tip
- Tungsten carbide body
- Sharpens 3/4 times
- Max. rpm: 24,000
Revolution PRO
PCD router cutter, Z2+2. For nesting operations on MDF, melamine, plywood and coated plywood. Greater axiality and better finish compared to Revolution. Ideal for preventing PVC edge breakage on exit. Watch the video
Design
- PCD tips
- Heavy metal body
- Sharpens 3/4 times
- Feed speed: up to 15 m/min
- Max. rpm: 24,000
Helix
PCD router cutter, Z2+1. For nesting operations on MDF, melamine, plywood and coated plywood. It allows excellent material removal and excellent chip discharge.
Design
- PCD tips
- Heavy metal body
- Sharpens 3/4 times
- Feed speed: up to 12 m/min
- Max. rpm: 24,000
Planing cutter
Polycrystalline diamond cutter to level the MDF support panels. For planing operations on CNC machining centres. Available in both the Z4 and Z6 versions. For MDF support panels.
Design
- MED-type tips in PCD
- Positive and negative shear angle
- Sharpening area: 2.0 mm
- Feed speed: up to 20 m/min
- Max. rpm: 16,500
Planing cutter with interchangeable knives
Cutters with interchangeable HW tungsten carbide knives specifically for levelling the MDF support panel. Available in both the Z3 and Z4 versions.
Design
- Interchangeable knives in HW
- Knife size 12x12x1.5
- Feed speed: up to 15 m/min
- Max. rpm: 12,000/18,000