Boring bits for blind holes in HW and HWM
Wirutex offers a wide range of carbide and solid carbide boring bits for blind holes to equip boring machines for machining on solid wood and wood composites, laminates, MDF and melamine. The solid tungsten carbide body guarantees excellent strength, durability and quality finish. The Wirutex range of boring bits in HW and HWM for blind holes includes:
- Boring bits for blind holes
- W-Plus technology boring bits for blind holes
- W-DrillCut boring bits for blind holes
- Boring bits for blind holes with curved ground spurs
- Boring bits for blind holes 2 spiral flutes L.57.5 / L. 70 / L. 77
- Boring bits for blind holes 4 spiral flutes L.57.5 / L. 70 / L. 85 / L. 105
- Helical boring bits for small blind holes Z=2
Boring bits for blind holes
Boring bits for blind holes with solid tungsten carbide (HWM) body and cutting edges . Wirutex recommends these to anyone who does not need to bore a large number of holes and does not require an excellent finish. Suitable for machining solid wood, wood composites and laminates.
Design
- Helical body in HWM
- Centring point – 2 cutting edges in HWM
- 2+2 spiral flutes
- 2 ground spurs with reinforced sharpening
W-DrillCut
Boring bits for blind holes in HWM, suitable for machining where the hole is near the bottom of the panel, minimising the risk of breakage. Suitable for chipboard, melamine, MDF and veneered and lacquered materials. Greater durability and better finish.
Design
- Helical body in HWM
- Centring point – 2 cutting edges in HWM
- 2 spiral flutes
- 2 ground spurs
Boring bits for blind holes with curved ground spurs
Suitable for machining solid wood, wood composites and laminates, these boring bits for blind holes in HW have 2 curved ground spurs and tungsten carbide (HW) cutting edges. Total length: 57.5 mm or 70 mm
Design
- Head in HW
- 2 cutting edges in HW
- 2 spiral flutes
- 2 ground spurs
Boring bits for blind holes 2 spiral flutes L. 57.5
Boring bits in HM for blind holes, ideal for machining solid wood, wood composites and laminates. With centring point and parallel shank with driving flat and adjusting screw.
Total length 57.5 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
- 2 spiral flutes
Boring bits for blind holes 2 spiral flutes L.70
Ideal for making blind holes on laminates, solid wood and wood composites, these boring bits in HW for blind holes with a total length of 70 mm have a solid tungsten carbide head and tungsten carbide cutting edges. Parallel shank with driving flat and adjusting screw.
Design
- Head in HWM
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
- 2 spiral flutes
Boring bits for blind holes 2 spiral flutes L. 77
Boring bits in HM for blind holes. Suitable for machining solid wood, wood composites and laminates. With centring point and parallel shank with driving flat and adjusting screw.
Total length 77 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
- 2 spiral flutes
Boring bits for blind holes 4 spiral flutes L. 57.5
Boring bits for blind holes in HW, 57.5 mm long, with 4 spiral flutes and 2 negative sharpening ground spurs. Perfect for machining solid wood, wood composites and laminates. With centring point and parallel shank with driving flat and adjusting screw.
Design
- Head in HWM
- 2 tungsten carbide cutting edges
- 2 negative sharpening ground spurs
- 4 spiral flutes
Boring bits for blind holes 4 spiral flutes L.70
Boring bits for blind holes in HW with 4 spiral flutes and 2 negative sharpening ground spurs. Ideal for blind holes in laminates, solid wood and wood composites. Total length 70 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
- 4 spiral flutes
Boring bits for blind holes 4 spiral flutes L. 85
Boring bits for blind holes in HW with 4 spiral flutes and 2 negative sharpening ground spurs. Ideal for laminates, solid wood and wood composites. With centring point and parallel shank with driving flat and adjusting screw. Total length 85 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
- 4 spiral flutes
Boring bits for blind holes 4 spiral flutes L. 105
Boring bits for blind holes in HW with 4 spiral flutes and 2 negative sharpening ground spurs. Ideal for laminates, solid wood and wood composites.
Total length 105 mm
Design
- Head in HWM
- 2 cutting edges in HW
- 2 negative sharpening ground spurs
- 4 spiral flutes
Helical boring bits for small blind holes Z=2
Helical boring bits in HWM perfect for making small blind holes in solid wood panels, wood composites and laminates. Size of shank same as cutting diameter.
Design
- 2 cutting edges in HWM
- 2 spiral flutes
- Shank same as cutting diameter