The main differences can be summed up as: -Cut duration -Cut quality -Materials to be processed -Sharpening -Price Read our detailed report Diamond and tungsten carbide tools: what are the differences?

The sharpening of a diamond tool is a very delicate process and must be carried out by qualified centres; to ensure maximum tool safety, it is necessary that the tip seat remains intact [...]

There’s no standard time that applies to all tools. It’s important to bear in mind: -the type of tool -the type of sharpening needed: finishing or precision finishing -the technology to be applied [...]

Thanks to its innate characteristics, the diamond can process hard, wood-based, plastic or non-ferrous materials. It’s unlikely that the same tool can be used on materials of different types: the specific sharpening technology [...]

Tungsten carbide can be used to process many different types of material: - all wood-based materials - all plastic materials - ferrous and non-ferrous materials

No. The parameters indicated in the catalogue refer to the minimum and maximum range allowed for that type of tool, and they vary according to the type of machining and the material.

Definitely, but the performance changes depending on the material being processed. If you want information on how to use Wirutex products in the best possible way, contact the technical-commercial office.

Wirutex usually recommends 0.2 - 0.3mm.

The heavy metal is obtained by sintering, so it guarantees outstanding rigidity and high stress resistance.

Aerotech® is an extraction turbine that captures machining dust and chips during nesting and routing operations. 
This system protects operators from inhaling dust, limits energy wastage thanks to the reduced use of compressed [...]

The ThermoGrip chuck is a thermal shrink clamping system that guarantees stability and rigidity. The Hydro-Grip chuck has a hydraulic clamping system that allows quick tool changes. For more information, visit the page [...]

The best hold is guaranteed by thermal shrink technology. It uses an interference fit, so the clamping force is directly proportional to the size of the s hank of the Cutter and that [...]

It depends on the type of application it’s used for: thermal shrinking offers optimum rigidity, whereas the Hydro system combines good rigidity with the ability to minimise run-out due to the shaft/bore coupling. [...]

Coupling is a very simple process that calls for a specific machine. How is the tool coupled? Watch the video

The sharpening technology used on “W-Plus” bits produces a high-performance tool that guarantees a longer working life and an extremely high number of bores.

There are no standard data that apply to all tools. The duration is affected by the type of material, the feed rate, the machine condition, the shifts worked and the chuck used.

It indicates the number of tips that work on the profile section being processed.

In order to be able to recommend the optimal machining parameters for each tool, the user must provide specific data such as the panel material/thickness/coating, the type of processing required and the machine [...]

The main difference lies in the accuracy: braze welding guarantees constant precision over time and can’t be altered by any external factors, unlike mechanical fixing which is subject to changes due to human [...]

The only feature that distinguishes the blades for processing these materials is the geometry of the tooth, but other characteristics may also vary depending on the specific application. In this case too, we [...]

H=4 and H=6 indicate the height of the diamond tip before it’s sharpened. The height of the tip in turn affects the number of sharpening processes that can be applied. As a rough [...]