
LOW-NOISE “ECO” pre-milling cutter
PCD cutter for RT20/RT30 pre-milling unit with LOW-NOISE technology to reduce noise during machining operations. For chipboard and MDF panels with melamine and its composites.
Design
- Z3+3
- Axiality 45°, 30°
- Rot RH- LH, symmetrical
- Max. rpm: 9,000 – 12,000

LOW-NOISE “HIGH-PERFORMANCE” pre-milling cutter
High performance PCD cutter for RT20/RT30 pre-milling unit with LOW-NOISE technology to reduce noise during machining operations. For chipboard and MDF panels with melamine and its composites.
Design
- Z3+3
- Axiality 45°
- Rot RH – LH
- Max. rpm: 9,000 – 12,000

“HIGH-PERFORMANCE” pre-milling cutter
High-performance PCD cutter for the RT20/RT30 pre-milling unit. For panels made from chipboard and MDF with melamine and its composites, as well as honeycomb core and veneered panels.
Design
- Z3+3
- Axiality 45°
- Rot RH – LH
- Max. rpm: 9,000 – 12,000

LOW-NOISE “HIGH-PERFORMANCE” pre-milling cutter
High performance PCD cutter for the external pre-milling unit with LOW-NOISE technology to reduce noise during machining operations. For chipboard and MDF panels with melamine and its composites.
Design
- Z3+3
- Axiality 45°
- Rot RH – LH
- Max. rpm: 9,000 – 12,000

“HIGH-PERFORMANCE” pre-milling cutter
High-performance PCD cutter for the external pre-milling unit. For panels made from chipboard and MDF with melamine and its composites, as well as honeycomb core and veneered panels.
Design
- Z3+3
- Axiality 45°
- Rot RH – LH
- Max. rpm: 9,000 – 12,000

GLADIO pre-milling cutter
Ultra high performance PCD cutter for the external pre-milling unit and RT20/RT30. For panels made from chipboard and MDF with melamine and its composites, decorative materials and cross grain panels.
Design
- Z3+3, Z4+4
- Multi-axiality
- Rot RH – LH
- Max. rpm: 12,000

SMART Pit Stop System pre-milling cutter
PCD adjustable cutter for the external and RT20/RT30 pre-milling unit. For chipboard and MDF panels with melamine and its composites. Watch the video!
Design
- Z5+5
- Axiality 35°
- Rot RH – LH
- Max. rpm: 12,000

End cutting saw blade
HM saw blade for the IT90 end trimming unit. End cutting of glued edges. For machining operations on supported and plastic edges.
Design
- 30° inclined tooth
- Z20+4
- Max. rpm: 12,000
Note: indicate the tool code in use, or the machine serial number

End cutting saw blade
HM saw blade for the IT90 end trimming unit, for end cutting of glued edges. Suitable for machining supported and plastic edges.
Design
- AlteNegative alternate tooth -20°
- Z16+4
- Max. rpm: 12,000
Note: indicate the tool code in use, or the machine serial number

End cutting saw blade
HM saw blade for IT90 end trimming unit, for end cutting of glued edges. Suitable for solid wood machining operations.
Design
- Alternate tooth
- Z16+4
- Max. rpm: 12,000
Note: indicate the tool code in use, or the machine serial number

End cutting saw blade
HM saw blade for the IT90 end trimming unit, for end cutting of glued edges. For machining operations of H. 90 solid wood panels.
Design
- Alternate tooth
- Z16+4
- Max. rpm: 12,000
Note: indicate the tool code in use, or the machine serial number

Overlapped trimmer with interchangeable knives
Cutter with interchangeable HM knives for the RS10 rough trimming unit. For edge trimming of supported and plastic edges.
Design
- Z6
- Max. rpm: 12,000
Cutter ID no.: D02125 Knife ID no.: D02135

Overlapped trimmer
PCD overlapped trimmer for the RS10 rough trimming unit. For edge trimming of supported and plastic edges.
Design
- Z6
- Max. rpm: 12,000
- Clockwise/ anti-clockwise rot
As a valid alternative to a trimmer with HM knives for a better finish.

Tilted trimmer with interchangeable knives
Cutter with interchangeable HM knives for the RF10 fine trimming unit. For trimming of supported and plastic edges.
Design
- HM knives
- Z6
- Max. rpm: 12,000
- For edge trimming on tilted engines

Tilted trimmer unit
PCD cutter for the RF10 fine trimming unit, for radiusing and chamfering of supported and plastic edges.
Design
- Z6
- Max. rpm: 12,000
- Clockwise/ anti-clockwise rot
- R 1/1,5/2/3

Fine trimmer
PCD cutter for the RF12 fine trimming unit, for chamfering of aluminium edges.
Design
- Z4
- Max. rpm: 12,000
- Clockwise/ anti-clockwise rot
- R 15°

Tilted trimmer with interchangeable multiprofile knives
Cutter with interchangeable HM knives for the RF30/RF40 fine trimming unit. For edge trimming of supported and plastic edges.
Design
- Multiprofile knives
- Z4
- Clockwise/ anti-clockwise rotation
- Max. rpm: 12,000

Tilted multiradius trimmer/fine trimmer
Multi-radius PCD cutter for the RF30/RF40 fine trimming unit. For ABS edge trimming on tilted engines.
Design
- PCD tips
- Z6
- Clockwise/ anti-clockwise rotation
- Max. rpm: 12,000

Tilted multiradius trimmer/fine trimmer
Multi-radius PCD cutter for the RF50 fine trimming unit. For ABS edge trimming on tilted engines.
Design
- PCD tips
- Z6
- Clockwise/ anti-clockwise rotation
- Max. rpm: 12,000

Tilted trimmer with interchangeable knives
Cutter with interchangeable HM knives for the RF30/RF40 fine trimming unit. For trimming solid wood, supported and plastic edges on tilted engines.
Design
- HM knives
- Z4
- Clockwise/ anti-clockwise rotation
- Max. rpm: 12,000

Rounding cutter with interchangeable knives
Cutter with interchangeable HM knives for AR30/AR34 corner rounding unit, for edge radiusing of supported and plastic edges.
Design
- Knives R1-1,5-2-3
- Z4
- Clockwise/ anti-clockwise rotation
- Max. rpm: 12,000

Rounding cutter
Cutter with braze-welded HM or PCD tips for the AR30/AR34 rounding unit. For edge radiusing and fine trimming of supported and plastic edges.
Design
- PCD or HM braze-welded cutting edges
- Z6
- Clockwise/ anti-clockwise rotation
- Max. rpm: 12,000

Rounding cutter
Cutter with HM cutting edges for the AR80 corner rounding unit; for radiusing and chamfering of supported and plastic edges.
Design
- HM braze-welded cutting edges
- Z6
- Clockwise/ anti-clockwise rotation
- Max. rpm: 12,000

Rounding cutter
PCD Cutter for the AR80 corner rounding unit, for radiusing and chamfering of edges. Suitable for machining supported and plastic edges.
Design
- PCD tips
- Z6
- Clockwise/ anti-clockwise rotation
- Max. rpm: 12,000

Cutter for IN-LAY machining operations
PCD cutter for the SF10 unit. For IN-LAY machining operations on SOFT-FORMING edgebanding. Suitable for various surfaces.
Design
- PCD tips
- Z8+2
- Clockwise/ anti-clockwise rotation
- Max. rpm: 12,000

Edge scraper
Solid HM insert for RBK-503 edge scraper unit. For edge finishing. Suitable for machining ABS edgebanding strips.
Design
- Rounding insert

Edge scraper with anti-bleaching profile
Solid HM insert with anti-bleaching profile for RB02 edge scraper unit. For edge finishing. Suitable for machining ABS edgebanding strips.
Design
- Insert in HWM with anti-bleaching profile

Multiradius edge scraper
Solid HM insert for RB30/RB40 edge scraper unit. For edge finishing. Machining operations on ABS edges.
Design
- Multiradius HWM insert

Multiradius edge scraper
Multiradius PCD edge scraper tool for RB50 edge scraper unit. For edge finishing. Machining operations on ABS edges.
Design
- Multiradius PCD cutter

Glue scraper
HM insert for RC10/SF glue scraper unit, for removing residual glue from supported, plastic edges. For versions of STREAM B MDS up to May 2017.
Design
- Dimensions: 16x16x4.7 mm

Glue scraper
HSS insert for RC05/SF glue scraper unit, for removing residual glue from supported, plastic edges. For versions of STREAM B MDS up to May 2017.
Design
- Measurements: 40x25x3 mm upper left-right

Glue scraper
Triangular insert for RC20/RC20 SOFT/RC40 glue scraper unit, for removing glue residue from edges. Suitable for machining supported and plastic edges.
Design
- 3 HM cutting edges

Glue scraper
HSS insert for RL10 soft unit, for removing residual glue during IN-LAY machining operations. For supported, plastic edges. For versions of STREAM B MDS up to May 2017.
Design
- Measurements: 21x15x2.5 mm