Whole tip Z=1
PCD whole tip router bits and HWM body. For finger joints and rebating on chipboard, MDF with laminate facing, Corian, HPL and stratified materials.
Design
- PCD tip
- HWM body
- Sharpening area: 3.0 mm
- Feed speed: as much as 5 to 10 m/min
- Max. rpm: 18,000 – 24,000
Whole tip Z=2
Router bits with 2 PCD whole tips and solid carbide body. For finger joints and rebating. Ideal for machining operations on chipboard, MDF and its derivates.
Design
- PCD tips
- HWM body
- Sharpening area: up to 3.0 mm
- Feed speed: from 3 to 20 m/min
- Max. rpm: 24,000 – 36,000
Advanced
PCD router cutters with whole tips Z=2, body in HWM, specifically for machining highly abrasive materials, phenolic materials, Corian and stratified materials. To ensure maximum stability and cutting quality, Wirutex recommends using with a ThermoGrip chuck.
Design
- PCD tips
- HWM body
- Sharpening area: up to 3.0 mm
- Feed speed: from 3 to 10 m/min
- Max. rpm: 24,000 – 36,000
NEW-Mini Z=1+1
PCD router cutters with good cutting quality. For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design
- PCD tips
- HM tungsten carbide plunging tip
- Positive and negative shear angle
- Sharpening area: 1.0 mm
- Feed speed: up to 15 m/min
- Max. rpm: 18,000 – 24,000
Nesting ECO
PCD router cutters for CABINET Nesting, ideal for working melamine and MDF panels. It can be used with any type of chuck. Recommended for use on Aerotech®Hydro or UniT chucks.
Design
- PCD tips
- PCD plunging tip
- Tungsten carbide body
- Sharpening area: 2.0 mm
- Feed speed: up to 20 m/min
- Max. rpm: 24,000
Nesting HP
PCD router cutters for Nesting. This can be used not only to machine MDF and melamine panels, but also for plywood and coated plywood. Recommended for use on Aerotech®Hydro chucks.
Design
- PCD tips
- PCD plunging tip
- Tungsten carbide body
- Sharpening area: 1.0 mm
- Feed speed: up to 20 m/min
- Max. rpm: 24,000
Nesting Revolution
PCD router cutter Z2+2 for nesting machining. Due to its versatility, it can be used to process different types of material. Compared with conventional Z=3 Nesting cutters, it has a higher discharge capacity.
Design
- PCD tips
- PCD plunging tip
- Tungsten carbide body
- Sharpens 3/4 times
- Max. rpm: 24,000
Planing cutter
Polycrystalline diamond cutter to level the MDF support panels. For planing operations on CNC machining centres. Available in both the Z4 and Z6 versions. For MDF support panels.
Design
- MED-type tips in PCD
- Positive and negative shear angle
- Sharpening area: 2.0 mm
- Feed speed: up to 20 m/min
- Max. rpm: 16,500
Planing cutter with interchangeable knives
Cutters with interchangeable HW tungsten carbide knives specifically for levelling the MDF support panel. Available in both the Z3 and Z4 versions.
Design
- Interchangeable knives in HW
- Knife size 12x12x1.5
- Feed speed: up to 15 m/min
- Max. rpm: 12,000/18,000
Router cutters for “T” grooves
Profiled router cutters in PCD, perfect for executing profiled grooves on unpolished chipboard, chipboard and faced MDF, polished cladding and laminated materials. Various profiles are available.
Design
- PCD tips
- Positive and negative shear angle
- Feed speed: up to 10 m/min
- rpm: 18,000
Helical router bits for locks
Polycrystalline diamond helical cutters for locks to be used on CNC machining centres. Ideal for machining solid wood and wood composite panels.
Design
- PCD tips
- HWM body
- Feed speed: up to 3 m/min
- Max. rpm: 14,000
NEW-Mini Z=1+1_ body in solid tungsten carbide
PCD router cutters with HWM body which provides greater resistance to vibrations and makes them less prone to breakage than the New-Mini Z1+1.
Design
- PCD tips
- Cutting edge head in HWM
- Positive and negative shear angle
- Sharpening area: 1.0 mm
- Feed speed: up to 20 m/min
- Max. rpm: 18,000 – 24,000
NEW-Mini Z=2+2
PCD Router cutters with double cover. This design ensures longer cutting for the tool as compared to the New-Mini Z1+1. For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design
- PCD tips
- Cutting edge head in tungsten carbide (HM)
- Positive and negative shear angle
- Sharpening area: 1.0 mm
- Feed speed: up to 20 m/min
- Max. rpm: 18,000 – 24,000
NEW-Mini Z=2+2_ body in solid tungsten carbide
PCD router cutters with double cover and HWM body. Longer cutting life, more resistant to vibrations and less prone to breakage. For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design
- PCD tips
- Cutting edge head in HWM
- Positive and negative shear angle
- Sharpening area: 1.0 mm
- Feed speed: up to 20 m/min
- Max. rpm: 24,000
TiGi-D.20
PCD router cutters with a diameter of 20 and a 30° cutting angle. They ensure good cutting quality and versatility. Suitable for contouring, boring and sizing materials such as unpolished chipboard, chipboard and faced MDF.
Design
- PCD tips
- PCD Plunging tip
- Positive and negative shear angle
- Sharpening area: 1.0 mm
- Feed speed: up to 20 m/min
- Max. rpm: 18,000 – 24,000
TiCi-D.20
PCD router bits with a diameter of 20 and a 35° cutting angle. Optimum cutting quality. Suitable for contouring, boring, sizing and for finger joints and rebating. Machining operations on unpolished chipboard, chipboard and faced MDF.
Design
- PCD tips
- PCD Plunging tip
- Positive and negative shear angle
- Sharpening area: 2.0 mm
- Feed speed: up to 25 m/min
- Max. rpm: 24,000
TiCi-D.22
PCD router cutters with a diameter of 22 and a 35° cutting angle. Optimum cutting quality. Suitable for contouring, boring, sizing and for finger joints and rebating. Machining operations on unpolished chipboard, chipboard and faced MDF.
Design
- PCD tips
- PCD plunging tip
- Positive and negative shear angle
- Sharpening area: 2.0 mm
- Feed speed: up to 25 m/min
- Max. rpm: 18,000 – 24,000
TiCi-D.25
PCD router cutters with a diameter of 25 and a 35° cutting angle. They ensure outstanding finishing quality. They are ideal for contouring and sizing. Machining operations on unpolished chipboard, chipboard and faced MDF panels.
Design
- PCD tips
- HM tungsten carbide plunging tip
- Positive and negative shear angle
- Sharpening area: 2.0 mm
- Feed speed: up to 25 m/min
- Max. rpm: 24,000
NEW-Helical Multi-cutting
Router bits for CNC with PCD helical multi-cutters. Extremely versatile, they have outstanding cutting quality and are ideal for sizing and contouring melamine, unpolished chipboard, MDF and faced chipboard panels.
Design
- PCD tips
- PCD plunging tip
- Positive and negative shear angle
- Sharpening area: 3.0 mm
- Feed speed: up to 25 m/min
- Max. rpm: 24,000
QuGi-D.25
PCD router cutters with a diameter of 25 and a 45° cutting angle. Maximum precision and cutting quality on unpolished chipboard, chipboard and faced MDF, as well as gloss and laminate coatings, plywood and solid wood.
Design
- PCD tips
- PCD plunging tip
- Positive and negative shear angle
- Sharpening area: 3.0 mm
- Feed speed: up to 30 m/min
- Max. rpm: 24,000
Batch-One
One of the most versatile and highest performance PCD cutters in the catalogue. For CNC machining centres, Cutting Centres and NextStep. Superior finishing quality; for contouring, boring, sizing, for finger joints and rebating. Machining operations on MDF, MDF coated MDF, chipboard, melamine and plywood panels. For the best performance, we recommend using it with a Hydro-Grip or Thermogrip chuck.
Design
- PCD tips
- PCD Plunging tip
- Heavy metal body
- Positive and negative shear angle
- Sharpening area: 2.0 mm
- Feed speed: up to 25 m/min
- Max. rpm: 24,000